Dongguan Kingfei Technology Co.,Limited

JUKI FX-1R FX-3RAL Pick And Place Machine

JUKI fx-1r Mounter Features:
JUKI high-speed placement machine fx-1r adopts advanced linear motor and unique 
hi-drive mechanism for high-speed placement.
Inherited the traditional concept of modular placement machine,
 and realized a high-speed placement of the placement machine.
Reasonably adjust all parts and improve the actual mounting speed.

 

JUKI Mounter fx-1r parameters:
Board size: 410*360mm
Component height: 6mm
33,000CPH:chip (optimal) / 25,000CPH: chip (IPC 9850)
Two independent multi-nozzle laser heads (8 total nozzles)
from 0603 (0201) to 20mm square components or 26.5×11mm
0402 (01005) option factory installed.
Component Size: Laser Recognition 0603 (Inch 0201) Chip ~20mm Square Element or 26.5*11mm
Component placement speed:chip:33000cph (best condition)
Chip piece: 25000cph (ipc9850)
Component placement accuracy: ±0.05mm
Component placement type: up to 80 types
Power supply: three-phase ac200~415v
Rated power: 3kva
Air pressure: 0.5±0.05mpa
Machine size: 1,880×1,731×1,490mm

Weight: about 2000kg


JUKI fx-3ral Mounter Features
■   Chip speed
90,000CPH (0.040Sec./chip/Optimum)
66,000CPH (IPC9850)
■   0402mm(01005 inch) ~ 33.5mmx33.5mm
■   Laser recognition : ±0.05mm(±3σ)
■   On-the-fly centering using integrated laser
■   2 stations, 4 gantries, 4 placement heads, 24 nozzles
■   Linear servo motor XY drive with full closed-loop control
■   Holds up to 240 components
■   Electrical or mechanical feeder trolley
High Productivity
JUKI’s FX-3 achieves a mounting performance of up to 90,000 CPH (optimum) thanks to four independent cross-rails, each with a six-nozzle placement head set on two mounting stations, providing the machine with 24 vacuum nozzles in total.

Compatible Feeders
The FX-3 supports mechanical and electronic feeders that can be used optionally with feeder trolleys if required. This provides companies with the flexibility to keep using their existing equipment for the long term.

User Friendliness
JUKI’s FX-3 includes a user-friendly operator interface with a 15-inch LCD touchscreen both at the front and the back of the machine for easy, intuitive use. This allows users to create pick-and-place programs even without extensive technical knowledge.


 

Send Message