Dongguan Kingfei Technology Co.,Limited

SMD Hot Air Gun SMD Soldering Iron

Features:

 

1.Based on the Company’s revolutionary, innovative design and meeting existing demands of the communication market, this all-in-one machine uses the latest chip technology and integrates a DC power supply, hot air gun, and soldering station!

2.Temperature controls utilize core technology, adopting microprocessor-PID programming for high-speed 100ms real-time

tracking of air gun outlet temperatures and soldering iron tip temperatures, with real-time calibration! Outlet temperatures are extremely stable.

3. With PID high-speed 100ms rapid temperature calibration, conversions are energy-efficient, providing constant temperature power consumption at levels much lower than comparable machines, equating to greater energy savings!

4. The air gun handle wire employs a high-temperature silicone wire (undamaged when 300osoldering tip contacts silicone wire for 30 seconds), stainless steel tubing, and a cutting-edge ceramic framed heating core for extremely stable and reliable performance!

5. Celsius/Fahrenheit Display Temperature Function: To satisfy market demand in different regions, the Company has designed a temperature display mode.

6. The soldering iron features a sleep function that can be set 10 minutes.

7.This new type add to 5V output USB interface ,it more convenience repair mobile phone,also can use power supply for mobile.

8.All parts is LED digital display ,and the current is 4 digital precise display current value,the current value can precise display mA value.it is very directly perceived through the senses.

9.The soldering iron has an iron tip cleaner and internal rosin. The rosin aids in the soldering of circuit boards by removing oxide films on the iron tip, reproduces oxidation, reduces iron tip surface tension, and rapidly removes oxides.

10. Pioneering with handle safety protection, an industry-first, a docked handle in the handle holder is required each time prior to machine operation. If not (placed) in the handle holder, the operator will not be able to detect compliance with safety instructions and the machine will not work. The purpose of such a function is to prevent handle misplacement or accidental placement in unsafe or flammable (work) locations that could lead to undesirable consequences.

 

Parameters

 

parameters

Rated voltage

AC 220V±10%  50Hz

Total power

≤760W

Operating Environment

0~40℃ relative humidity<80%

Storage environment

-20~80℃  relative humidity<80%

Dimension

255*188*125mm

Weight

4.2KG

Performance Parameter

Hot air rework

Soldering iron

Operating Voltage

AC 220V±10%  50Hz

AC 26V±10%  50Hz

Output power

720W

50W

Temperature range

100℃~480℃

200℃~480℃

Air Supply Mode      

Brushless-Motor Fan

---

Air Flow

120L/min(MAX)

---

   Temperature Stability

±2℃ (Static)

±2℃ (Static)

Display Mode

red LED display

red LED display

Heating Core

Ceramic Framed Heating Core

Common Heating Core

Standard nozzles/tips

(10mm,8mm,5mm,13mm)

4 PCS nozzles

I

Tip-to-Ground Impedance

---

<2Ω

Tip-to-Ground Voltage

---

<2mV

DC power supply

Output voltage

 0~15V

Output current

0-1A

 Output power

15W

Protection Mode

Short-circuit over-current

Voltage display Mode

red LED display

Current display Mode

red LED display

  Load stability

<0.01±2mv

Ripple and Noise

<1mvrms(virtual value)

       
 


Send Message