How to set a nozzle? The reference head on which a nozzle is mounted measures the height of the nozzle tip (measured value is to be entered into the Noz. height field) and nozzle width ( to be entered into the Noz. No. ) with laser. In addition, the r Read More

Setting Group When you select the setting group command from the menu bar, the following items appear on the displayed menu. ATC nozzle setup This menu command allows you to set information on each nozzle mounted on the ATC. When you select this ATC n Read More

Registered nzl. no table This command displays the list of the nozzles already registered and their information on the screen. When you select the Registered nzl. no table command from the filemenu, the Registered nozzle no. table dialog box appears o Read More

Part number : E3623-721-0A0 Description : JUKI gripper nozzle 800 ASSY for 0.8mm-2.2mm Part number : E3624-721-0A0 Description : JUKI gripper nozzle 801 ASSY for 1.8mm-3.2mm Part number : E3625-721-0A0 Description : JUKI gripper nozzle 802 ASSY for 2. Read More

E36157290A0 nozzle ASSEMBLY 510 E36167290A0 nozzle ASSEMBLY 511 E36177290A0 nozzle ASSEMBLY 512 E36187290A0 nozzle ASSEMBLY 513 E36197290A0 nozzle ASSEMBLY 514 E36207290A0 nozzle ASSEMBLY 515 E36217290A0 nozzle ASSEMBLY 516 E36227290A0 nozzle ASSEMBLY Read More

nozzle ASSEMBLY 500 40011046 nozzle ASSEMBLY 501 40001339 nozzle ASSEMBLY 502 40001340 nozzle ASSEMBLY 503 40001341 nozzle ASSEMBLY 505 40001343 nozzle ASSEMBLY 504 40001342 nozzle ASSEMBLY 506 40001344 nozzle ASSEMBLY 507 40001345 nozzle A Read More

Cleaning of the nozzle(Tool to be used: Ultrasonic cleaner) 1, Dampen the entire nozzle whose number is from 500 to 504, 509 in alcohol, and clean it with an ultrasonic cleaner or similar tool for five minutes. 2, To prevent the urethane section of th Read More

Applying of oil to a nozzle after cleaning it by air gun, cotton swab and waste cloth. If you leave the nozzle without doing anything to it after cleaning it, the inside of the nozzle may be rusted. Follow the procedure below to apply oil to the nozzl Read More

Clearing of the nozzle outer by cotton swab and waste cloth every month 1, Clean the inside of the nozzle outer with a cotton swab dampened with alcohol 2, Clean the surface and the spring section of the nozzle outer with alcohol Lubrication: Applying Read More

nozzle Attachment / Detachment Error 1, The surface of the laser sensor is stained. - Clean the surface of the laser sensor. 2, The ATC is stained - Clean the ATC. Clean dust and grease from the ATC. 3, The nozzle is not installed onto the ATC firmly. Read More